In today's lab, we are going to use nodal analysis to calculate the two voltages at position V1 and position V2. And, compare the theoretical or actual value of voltage.
Per-Lab:
Measure the value of three resistors
After we calculated V1 and V2, we set up the experiment, and we connect it to with waveform as power supply. And connect the three resistors.
Recorded data.:
In the experiment, we recording two voltage data is 2.44V and 4.43V, compare the value from pre-lab 2.424V and 4.424V. their %difference are -0.660% and -0.136%. because our % difference are both less than 1%, our value should be very correct.
No comments:
Post a Comment